+86 15017098728
M18 2 Pin Threaded Waterproof Connector Factories IP67
video
M18 2 Pin Threaded Waterproof Connector Factories IP67

M18 2 Pin Threaded Waterproof Connector Factories IP67

The M18 threaded connector provides a practical solution for industrial equipment requiring multiple electrical circuits in one compact interface. Available in 2-, 3-, 4-, 5-, and 6-pin versions, it allows power, signal, and control lines to be integrated into the same connection point. The M18×1.0 locking thread is suitable for machinery operating under vibration, such as automation systems, packaging equipment, and mobile devices. The 2- to 4-pin models support 10A current capacity, while 5- and 6-pin versions provide additional contacts at 5A per pin for signal and control applications. Built with nickel-plated brass contacts, PVC jacket, and IP67 protection, it operates reliably between -20°C and +85°C with cable diameters up to 10.0mm. Custom pin layouts and cable lengths can be adjusted according to installation requirements.
Send Inquiry
Add To Inquiry
Product Details ofM18 2 Pin Threaded Waterproof Connector Factories IP67
img

Dongguan Hejiaxin Technology Co., Ltd. is one of the leading manufacturers and suppliers of m18 2 pin threaded waterproof connector factories ip67 in China. Please feel free to wholesale durable products made in China here and get pricelist from our factory. All customized products are with high quality and competitive price.

 

Technical Specifications

 

Parameter

Specification

Voltage Rating

AC250V

Current R ating

≤10A

Times of plug

1500

Max Cable OD

≤10.0mm

Circuit Structure

Parallel

Contact Resistance

10mΩ

InsulationStructure

500MΩatDC500V

Voltage endurance at room temperature

1.5KV

TemperatureRating

-20℃~+85℃

Waterproof Level

IP67

 

Material Specifications

 

Parameter

Specification

wire Material

PVC, Rubber

Jack Material

PVC

Pin Material

Nickle-plated brass

Sealing ring

Rubber

 

Product Engineering Drawing

 

Core Configuration Diagram

Dimensional Drawing

Key callouts from the CAD – male plug overall length 46.8mm, mating thread 15.7mm, panel-side thread 11.7mm. Female receptacle thread depth 17.3mm, mounting nut 14.7mm across flats. Coupling nut width 12.4mm, back-end nut 9.0mm, with a 21.5mm reference on the mating face and 18.3mm across the panel flange. Also note the 12.4mm dimension on the female tail section. All use M18×1.0 threads – same as our standard M18 series, so mating plugs are interchangeable. Max cable OD per spec. ISO 2768‑m tolerances apply. PDF or DWG available if you need to overlay this onto your panel layout. Housing length, thread profile, or nut sizes can be adjusted – just tell us what doesn't work for your setup.

 

Product detail

M18 2 Core 10A

Cross‑Section of Circular Connector (4‑Pin) with Mated Pair

This cross‑section view shows the internal structure of the 4‑pin circular connector – the contact arrangement, insulator, and sealing path are clearly visible. The adjacent image shows the male and female fully mated, confirming proper alignment and thread engagement. Useful for understanding the sealing mechanism and contact depth before assembly.

Side View of Male/Female with Accessories (Red/Blue Cables)

This side‑angle shot shows the male plug and female receptacle separated, alongside the mounting nut, sealing washer, and the red/blue PVC wires attached to the terminals. The wire colour coding aids in quick polarity identification during field wiring. This image serves as a practical reference for cable preparation and assembly sequence.

M18 2 Pin 10A

 

FAQ

 

Q1: When should I use threaded, quick-latch, or self-locking coupling?

A: It depends on the job. Threaded gives you the tightest hold – good for places with a lot of shaking, like vehicles or factory machinery. Quick-latch is all about speed – plug and unplug often? That's your pick. Self-locking is for those tight spots where you can't get a tool in. Pick the one that fits your work conditions.

Q2: What's the difference between male and female connectors – and why does it matter?

A: Male connectors have pins that stick out; female ones have sockets that receive them. They're made to go together – male goes into female. We stock both and can supply matching pairs. It matters because you need the right combination for your cable ends and equipment ports – get it wrong and nothing fits.

 

img img img

Hot Tags: m18 2 pin threaded waterproof connector factories ip67, China m18 2 pin threaded waterproof connector factories ip67 manufacturers, suppliers, factory, M18 2 core Waterproof Connector, M18 2 Pin Waterproof Connector, m18 waterproof connector

Previous
No Information
Next
No Information

Send Inquiry

(0/10)

clearall