M12 2 Pin Threaded Waterproof Connector IP67

This front‑face view shows the male plug with two nickel‑plated brass contacts rated at 6A per pin, arranged in the standard M12 circular pattern (1.0 mm diameter pins). The black PVC moulded housing provides robust insulation and mechanical protection. The integral polarising key is visible at the 12 o'clock position, ensuring correct mating orientation. The sealing O‑ring is not exposed on this face – it sits behind the thread root. The flat face design allows easy cleaning of debris before connection. Use this image to inspect pin straightness, plating integrity, and housing surface quality.

This angled view presents the male plug (left) and female receptacle (right) separated at approximately 45°, allowing clear visibility of both M12×1.0 metal threads – male external and female internal, both nickel‑plated brass. The sealing O‑ring is visible on the male thread root. The angle also reveals the polarising key on the male and the corresponding slot on the female. No plastic threads are used; all load‑bearing surfaces are metallic for torque retention over repeated cycles. This image aids in inspecting thread condition, seal position, and key alignment before assembly.